- Postcode district
- TD5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Jedburgh, Duns, Galashiels
- Building rules
- Scotland
Are sliding doors for new openings right for your Kelso home?
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for new openings tend to work out in practice:
Where a Kelso house has a bay, chimney breast or upstairs window directly above the planned opening, the engineer will need to account for it in the steel design.
Living in a Kelso flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
- Widening a standard patio opening to a larger span can transform how a room connects to the garden, giving a wall of glass rather than a doorway.
- The door is measured from the finished opening rather than from drawings, so it fits the opening as built, not as it was intended to be built.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
How much sun will a door in Kelso get?
Daylight in Kelso runs from about 7 h 02 min in December to 17 h 31 min in June, with the noon sun at roughly 11° and 58° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for sliding doors for new openings in Kelso
Use these guide prices to budget for the whole job in Kelso: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £6,995–£7,795 |
| 3.6 m | 3 panels | £9,695–£10,895 |
| 4.0 m | 3 panels | £10,295–£11,595 |
See every size on the sliding doors for new openings page or try the guide price tool.
What happens when you order sliding doors for new openings in Kelso?
Surveys in the TD5 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Kelso?
A new opening in Scotland is warrant work: the council needs structural information for the beam and opening before building starts, and the finished door must meet the Scottish standards.
Specification choices for sliding doors for new openings in Kelso
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
Questions about sliding doors for new openings in Kelso
Do you fit sliding doors for new openings in Kelso?
Yes. We survey and fit sliding doors for new openings in Kelso and across the Scottish Borders, including nearby Jedburgh and Duns. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.
Why does beam deflection matter for sliding doors?
Beam deflection matters because a sliding door needs a straight, level head to run properly. Every beam bends slightly under load, and if it bends too much the frame can be squeezed, making panels stiff or causing them to bind. Telling the structural engineer that a large sliding door will go underneath allows them to design a stiffer beam.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.