- Postcode district
- NE38
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Chester-le-Street, Houghton-le-Spring, Sunderland
- Building rules
- England
New and widened openings for sliding doors in Washington: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for new openings tend to work out in practice:
For homes in Washington that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
Turning a Washington kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
- Widening a standard patio opening to a larger span can transform how a room connects to the garden, giving a wall of glass rather than a doorway.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
Sunlight, glass and orientation in Washington
The midday sun over Washington ranges from about 12° at the winter solstice to about 59° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
New and widened openings for sliding doors prices in Washington
Use these guide prices to budget for the whole job in Washington: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £6,995–£7,795 |
| 2.4 m | 2 panels | £7,895–£8,895 |
| 6.0 m | 4 panels | £13,295–£15,095 |
See every size on the sliding doors for new openings page or try the guide price tool.
Timescales for sliding doors for new openings in Washington
A surveyor visits your Washington home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals — and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Washington?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Choosing the specification
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
Questions about sliding doors for new openings in Washington
Do I need building approval for sliding doors for new openings in Washington?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
Does the Party Wall Act apply to my new opening?
The Party Wall etc. Act 1996 (England and Wales) may apply if the new steel beam bears on, or is cut into, a wall you share with a neighbour, as is common in semi-detached and terraced houses. If it applies, you must serve notice on the neighbour before the work starts. A rear wall entirely on your own property is less likely to be affected.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.