- Postcode district
- B13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Kings Heath, Edgbaston, Hall Green
- Building rules
- England
New and widened openings for sliding doors in Moseley: what to know
Most homeowners choosing sliding doors for new openings want the same things: more light, a clear view and a door that is easy to live with.
Thinking about a wider opening in Moseley but unsure of the size? Mark it out on the wall inside and out with tape, then picture the furniture and the view before you decide.
Turning a Moseley kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
- The door is measured from the finished opening rather than from drawings, so it fits the opening as built, not as it was intended to be built.
How much sun will a door in Moseley get?
Daylight in Moseley runs from about 7 h 40 min in December to 16 h 49 min in June, with the noon sun at roughly 14° and 61° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do sliding doors for new openings cost in Moseley?
These figures combine an aluminium sliding door with the building work to form or widen the opening, including structural calculations and VAT. Your price is fixed in a written quote once the wall in your Moseley home has been surveyed; council fees are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £7,495–£8,295 |
| 4.0 m | 3 panels | £10,295–£11,595 |
| 4.8 m | 4 panels | £11,495–£12,995 |
See every size on the sliding doors for new openings page or try the guide price tool.
What happens when you order sliding doors for new openings in Moseley?
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals), and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door. If you are in Kings Heath or Edgbaston, the same process and prices apply.
Do you need approval in Moseley?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Specification choices for sliding doors for new openings in Moseley
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
Questions about sliding doors for new openings in Moseley
Do I need building approval for sliding doors for new openings in Moseley?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Do I need planning permission for a new opening?
Planning rules for altering an elevation depend on the property and where you are, so it is worth checking with your council before you commit. Flats, listed buildings and properties covered by an Article 4 direction are the most likely to need consent. Wales and Scotland have their own planning rules. Our planning guide sets out the questions to ask.
Why does beam deflection matter for sliding doors?
Beam deflection matters because a sliding door needs a straight, level head to run properly. Every beam bends slightly under load, and if it bends too much the frame can be squeezed, making panels stiff or causing them to bind. Telling the structural engineer that a large sliding door will go underneath allows them to design a stiffer beam.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.