- Postcode district
- BN18
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Littlehampton, Bognor Regis, Worthing
- Building rules
- England
Are sliding doors for new openings right for your Arundel home?
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for new openings tend to work out in practice:
Living in an Arundel flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
For homes in Arundel that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
- Widening a standard patio opening to a larger span can transform how a room connects to the garden, giving a wall of glass rather than a doorway.
- Structural calculations are included in the guide price, and the Building Regulations application is handled as part of the project, so you are not left coordinating engineers and inspectors.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
How much sun will a door in Arundel get?
Daylight in Arundel runs from about 7 h 56 min in December to 16 h 31 min in June, with the noon sun at roughly 16° and 63° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do sliding doors for new openings cost in Arundel?
These figures combine an aluminium sliding door with the building work to form or widen the opening, including structural calculations and VAT. Your price is fixed in a written quote once the wall in your Arundel home has been surveyed; council fees are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £6,595–£7,295 |
| 2.1 m | 2 panels | £7,495–£8,295 |
| 3.0 m | 2 panels | £8,795–£9,895 |
See every size on the sliding doors for new openings page or try the guide price tool.
Timescales for sliding doors for new openings in Arundel
A surveyor visits your Arundel home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals — and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Arundel?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Finishes and extras for sliding doors for new openings
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
Questions about sliding doors for new openings in Arundel
Do I need building approval for sliding doors for new openings in Arundel?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.
Do I need planning permission for a new opening?
Planning rules for altering an elevation depend on the property and where you are, so it is worth checking with your council before you commit. Flats, listed buildings and properties covered by an Article 4 direction are the most likely to need consent. Wales and Scotland have their own planning rules. Our planning guide sets out the questions to ask.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.