- Postcode district
- DL14
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Newton Aycliffe, Sedgefield, Durham
- Building rules
- England
External pocket sliding doors in Bishop Auckland: what to know
These are the points a surveyor will go through with you when you choose external pocket sliding doors for a home in Bishop Auckland:
Solid brick, cavity block or timber frame: the way your Bishop Auckland wall is built decides how the pocket is formed, which is why the survey looks at it closely.
If the wall beside your Bishop Auckland patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
Sunlight, glass and orientation in Bishop Auckland
At the latitude of Bishop Auckland, the midday sun climbs to about 59° in late June but only about 12° in late December, when daylight lasts around 7 h 14 min against 17 h 18 min in midsummer. A south-facing external pocket sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Typical costs for external pocket sliding doors around Bishop Auckland
Pricing does not change because you are in Bishop Auckland: the ranges below include fitting, structural calculations and VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 1 panel | £6,595–£8,095 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 4.0 m | 2 panels | £9,895–£12,095 |
See every size on the external pocket sliding doors page or try the guide price tool.
Timescales for external pocket sliding doors in Bishop Auckland
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks from survey sign-off), and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. If you are in Newton Aycliffe or Sedgefield, the same process and prices apply.
Do you need approval in Bishop Auckland?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for external pocket sliding doors
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
Questions about external pocket sliding doors in Bishop Auckland
Can you match other doors and windows in my Bishop Auckland home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.