- Postcode district
- EH52
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Livingston, Linlithgow, Bathgate
- Building rules
- Scotland
What external pocket sliding doors offer homes in Broxburn
A few practical points decide whether external pocket sliding doors suit a particular room and opening:
If the wall beside your Broxburn patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
However sheltered or exposed your Broxburn home is, external pocket sliding doors need a drained pocket and a clear external channel so rainwater running along the track never sits inside the wall.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
Light and sun in Broxburn
Daylight in Broxburn runs from about 6 h 58 min in December to 17 h 36 min in June, with the noon sun at roughly 11° and 58° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
External pocket sliding doors prices in Broxburn
Pricing does not change because you are in Broxburn: the ranges below include fitting, structural calculations and VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 1 panel | £6,595–£8,095 |
| 2.4 m | 2 panels | £7,495–£9,195 |
| 4.8 m | 3 panels | £11,095–£13,595 |
See every size on the external pocket sliding doors page or try the guide price tool.
Timescales for external pocket sliding doors in Broxburn
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks from survey sign-off), and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. If you are in Livingston or Linlithgow, the same process and prices apply.
Do you need approval in Broxburn?
In Scotland, forming or widening an opening needs a building warrant before work starts, with structural details for the new beam. The door must meet the Scottish building standards for energy and safety glazing.
Choosing the specification
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
Questions about external pocket sliding doors in Broxburn
Do you fit external pocket sliding doors in Broxburn?
Yes. We survey and fit external pocket sliding doors in Broxburn and across Edinburgh and the Lothians, including nearby Livingston and Linlithgow. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.