- Postcode district
- GL54
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Chipping Norton, Shipston-on-Stour, Witney
- Building rules
- England
External pocket sliding doors in Stow-on-the-Wold: what to know
Before you settle on a door type, it helps to know what external pocket sliding doors do well and what to check before you order.
If the only wall beside your Stow-on-the-Wold opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
If the wall beside your Stow-on-the-Wold patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
- Open panels are hidden inside the wall rather than stacked in view, keeping the opening clean-lined compared with a bifold stack at one side.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
How much sun will a door in Stow-on-the-Wold get?
Because Stow-on-the-Wold sees long summer days (about 16 h 43 min) and short winter ones (about 7 h 45 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do external pocket sliding doors cost in Stow-on-the-Wold?
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 1 panel | £7,095–£8,595 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 4.8 m | 3 panels | £11,095–£13,595 |
See every size on the external pocket sliding doors page or try the guide price tool.
Timescales for external pocket sliding doors in Stow-on-the-Wold
Here is the usual sequence in Stow-on-the-Wold: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Chipping Norton, Shipston-on-Stour and Witney.
Do you need approval in Stow-on-the-Wold?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Choosing the specification
- Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
Questions about external pocket sliding doors in Stow-on-the-Wold
Is the price different in Stow-on-the-Wold?
No. Guide prices for external pocket sliding doors are the same across mainland Britain, including Stow-on-the-Wold. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Does a pocket in the wall cause heat loss?
A pocket in the wall does not have to cause significant heat loss if it is insulated, lined and sealed as part of the design, and the door itself typically achieves whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better. Wales, Scotland and Northern Ireland have their own energy rules.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.
How much do external pocket sliding doors cost?
External pocket sliding doors start from a guide price of £6,595 for a 1.8 m single-panel door, fitted, inc VAT, at standard 2.1 m height, including forming the wall pocket. A 3 m two-panel door is a guide £8,395–£10,295, and a 6 m three-panel door is around £12,895. Wall construction, glass and finish affect the figure, which is fixed in a written quote after survey.