- Postcode district
- TW13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Hounslow, Twickenham, Teddington
- Building rules
- England
Is an external pocket sliding door a good fit for your home in Feltham?
Most homeowners choosing external pocket sliding doors want the same things: more light, a clear view and a door that is easy to live with.
Want the whole width of your Feltham kitchen open to the garden but prefer the look of sliders to bifolds? A pocket gives you both, at the cost of more building work.
For a Feltham extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
- Open panels are hidden inside the wall rather than stacked in view, keeping the opening clean-lined compared with a bifold stack at one side.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
- A removable access panel on the inside of the pocket wall lets the rollers be reached and adjusted without opening up the plaster.
Light and sun in Feltham
In Feltham the shortest day has roughly 7 h 50 min of daylight and the longest about 16 h 38 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
External pocket sliding doors prices in Feltham
Pricing does not change because you are in Feltham: the ranges below include fitting, structural calculations and VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 4.0 m | 2 panels | £9,895–£12,095 |
| 4.8 m | 3 panels | £11,095–£13,595 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Feltham
Here is the usual sequence in Feltham: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Hounslow, Twickenham and Teddington.
Do you need approval in Feltham?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Which options matter for external pocket sliding doors?
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
Questions about external pocket sliding doors in Feltham
Is the price different in Feltham?
No. Guide prices for external pocket sliding doors are the same across mainland Britain, including Feltham. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.