- Postcode district
- E15
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Leyton, Hackney, Wanstead
- Building rules
- England
External pocket sliding doors in Stratford: what to know
Here is what to weigh up if you are considering external pocket sliding doors for a home in Stratford:
Solid brick, cavity block or timber frame: the way your Stratford wall is built decides how the pocket is formed, which is why the survey looks at it closely.
For a Stratford extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
- Open panels are hidden inside the wall rather than stacked in view, keeping the opening clean-lined compared with a bifold stack at one side.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
Sunlight, glass and orientation in Stratford
At the latitude of Stratford, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 49 min against 16 h 39 min in midsummer. A south-facing external pocket sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for external pocket sliding doors in Stratford
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £9,295–£11,395 |
| 4.0 m | 2 panels | £9,895–£12,095 |
| 4.8 m | 3 panels | £11,095–£13,595 |
See every size on the external pocket sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Stratford
A surveyor visits your Stratford home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks from survey sign-off — and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door.
Rules for external pocket sliding doors in England
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for external pocket sliding doors
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
Questions about external pocket sliding doors in Stratford
Can you match other doors and windows in my Stratford home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How much do external pocket sliding doors cost?
External pocket sliding doors start from a guide price of £6,595 for a 1.8 m single-panel door, fitted, inc VAT, at standard 2.1 m height, including forming the wall pocket. A 3 m two-panel door is a guide £8,395–£10,295, and a 6 m three-panel door is around £12,895. Wall construction, glass and finish affect the figure, which is fixed in a written quote after survey.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.
Does a pocket in the wall cause heat loss?
A pocket in the wall does not have to cause significant heat loss if it is insulated, lined and sealed as part of the design, and the door itself typically achieves whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better. Wales, Scotland and Northern Ireland have their own energy rules.