- Postcode district
- UB8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Ruislip, Hayes, Gerrards Cross
- Building rules
- England
Are external pocket sliding doors right for your Uxbridge home?
A few practical points decide whether external pocket sliding doors suit a particular room and opening:
Want the whole width of your Uxbridge kitchen open to the garden but prefer the look of sliders to bifolds? A pocket gives you both, at the cost of more building work.
If the only wall beside your Uxbridge opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
- A removable access panel on the inside of the pocket wall lets the rollers be reached and adjusted without opening up the plaster.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
How much sun will a door in Uxbridge get?
Sun angles matter for big glazed doors. Around Uxbridge, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for external pocket sliding doors in Uxbridge?
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £9,295–£11,395 |
| 4.8 m | 3 panels | £11,095–£13,595 |
| 6.0 m | 3 panels | £12,895–£15,795 |
See every size on the external pocket sliding doors page or try the guide price tool.
How fitting works in Uxbridge
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks from survey sign-off), and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. If you are in Ruislip or Hayes, the same process and prices apply.
Do you need approval in Uxbridge?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Choosing the specification
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
Questions about external pocket sliding doors in Uxbridge
Is the price different in Uxbridge?
No. Guide prices for external pocket sliding doors are the same across mainland Britain, including Uxbridge. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.