- Postcode district
- GU51
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Farnborough, Aldershot, Yateley
- Building rules
- England
Is an external pocket sliding door a good fit for your home in Fleet?
A few practical points decide whether external pocket sliding doors suit a particular room and opening:
If the wall beside your Fleet patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
If the only wall beside your Fleet opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
- A removable access panel on the inside of the pocket wall lets the rollers be reached and adjusted without opening up the plaster.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
Light and sun in Fleet
Daylight in Fleet runs from about 7 h 52 min in December to 16 h 36 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
External pocket sliding doors prices in Fleet
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £8,395–£10,295 |
| 3.6 m | 2 panels | £9,295–£11,395 |
| 4.8 m | 3 panels | £11,095–£13,595 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Fleet
Here is the usual sequence in Fleet: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Farnborough, Aldershot and Yateley.
Do you need approval in Fleet?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Choosing the specification
- Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
Questions about external pocket sliding doors in Fleet
Can you match other doors and windows in my Fleet home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.