- Postcode district
- IV1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Dingwall, Nairn, Forres
- Building rules
- Scotland
External pocket sliding doors in Inverness: what to know
These are the points a surveyor will go through with you when you choose external pocket sliding doors for a home in Inverness:
Solid brick, cavity block or timber frame: the way your Inverness wall is built decides how the pocket is formed, which is why the survey looks at it closely.
For an Inverness extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- A removable access panel on the inside of the pocket wall lets the rollers be reached and adjusted without opening up the plaster.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
Daylight in Inverness and what it means for your glass
The midday sun over Inverness ranges from about 9° at the winter solstice to about 56° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
What should you budget for external pocket sliding doors in Inverness?
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 1 panel | £7,095–£8,595 |
| 4.8 m | 3 panels | £11,095–£13,595 |
| 6.0 m | 3 panels | £12,895–£15,795 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Inverness
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks from survey sign-off), and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. If you are in Dingwall or Nairn, the same process and prices apply.
Do you need approval in Inverness?
In Scotland, forming or widening an opening needs a building warrant before work starts, with structural details for the new beam. The door must meet the Scottish building standards for energy and safety glazing.
Options to consider for your external pocket sliding door
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
Questions about external pocket sliding doors in Inverness
Do you fit external pocket sliding doors in Inverness?
Yes. We survey and fit external pocket sliding doors in Inverness and across the Highlands and Islands, including nearby Dingwall and Nairn. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How do you maintain rollers inside a wall pocket?
You maintain pocket door rollers through the access panel built into the inside of the pocket wall, which lets the track be vacuumed and the rollers adjusted without opening up the wall. Keep the outside drainage channel clear so water cannot back up into the pocket, and run the panels fully in and out now and then. If a panel starts to rub inside the pocket, a small roller height adjustment through the access panel usually cures it.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.