- Postcode district
- LD2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Llandrindod Wells, Hay-on-Wye, Brecon
- Building rules
- Wales
Are external pocket sliding doors right for your Builth Wells home?
These are the points a surveyor will go through with you when you choose external pocket sliding doors for a home in Builth Wells:
Solid brick, cavity block or timber frame: the way your Builth Wells wall is built decides how the pocket is formed, which is why the survey looks at it closely.
If the only wall beside your Builth Wells opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
- Open panels are hidden inside the wall rather than stacked in view, keeping the opening clean-lined compared with a bifold stack at one side.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
How much sun will a door in Builth Wells get?
In Builth Wells the shortest day has roughly 7 h 43 min of daylight and the longest about 16 h 46 min. The noon sun sits near 14° above the horizon in winter and 61° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
External pocket sliding doors prices in Builth Wells
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 1 panel | £6,595–£8,095 |
| 4.0 m | 2 panels | £9,895–£12,095 |
| 6.0 m | 3 panels | £12,895–£15,795 |
See every size on the external pocket sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Builth Wells
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks from survey sign-off), and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. If you are in Llandrindod Wells or Hay-on-Wye, the same process and prices apply.
Do you need approval in Builth Wells?
Widening an opening in Wales means a Building Regulations application for the structural work, calculations for the beam, and a door that meets Approved Document L (Wales). Party wall notices may be needed in semi-detached and terraced homes.
Choosing the specification
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
Questions about external pocket sliding doors in Builth Wells
How soon can you survey in Builth Wells?
Surveys in the LD2 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.
How do you maintain rollers inside a wall pocket?
You maintain pocket door rollers through the access panel built into the inside of the pocket wall, which lets the track be vacuumed and the rollers adjusted without opening up the wall. Keep the outside drainage channel clear so water cannot back up into the pocket, and run the panels fully in and out now and then. If a panel starts to rub inside the pocket, a small roller height adjustment through the access panel usually cures it.