External pocket sliding doors across South Glamorgan
Here is what to weigh up if you are considering external pocket sliding doors for a home in South Glamorgan:
If the only wall beside your South Glamorgan opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
For a South Glamorgan extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
Guide prices for external pocket sliding doors in South Glamorgan
Pricing does not change because you are in South Glamorgan: the ranges below include fitting, structural calculations and VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 3.6 m | 2 panels | £9,295–£11,395 |
| 4.8 m | 3 panels | £11,095–£13,595 |
Every size is on the external pocket sliding doors page.
Daylight and glass in South Glamorgan
Sun angles matter for big glazed doors. Around South Glamorgan, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Towns we cover in South Glamorgan
We survey and fit external pocket sliding doors in 6 towns across South Glamorgan, including the CF10, CF61, CF62, CF64, CF71 postcode districts.
Approvals in Wales
In Wales, structural work to form or widen an opening needs Building Regulations approval and structural calculations, and the new door must meet the Welsh energy and safety glazing requirements. The Party Wall etc. Act 1996 may apply where steelwork bears on a party wall.
Questions about external pocket sliding doors in South Glamorgan
Can you match other doors and windows in my South Glamorgan home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
How much do external pocket sliding doors cost?
External pocket sliding doors start from a guide price of £6,595 for a 1.8 m single-panel door, fitted, inc VAT, at standard 2.1 m height, including forming the wall pocket. A 3 m two-panel door is a guide £8,395–£10,295, and a 6 m three-panel door is around £12,895. Wall construction, glass and finish affect the figure, which is fixed in a written quote after survey.