- Postcode district
- NE38
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Chester-le-Street, Houghton-le-Spring, Sunderland
- Building rules
- England
External pocket sliding doors in Washington: what to know
These are the points a surveyor will go through with you when you choose external pocket sliding doors for a home in Washington:
For a Washington extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
If the wall beside your Washington patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
- Insulating the pocket wall and sealing the panel edges limits heat loss through the cavity, helping the wall beside the door perform like the rest of the house.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
Sunlight, glass and orientation in Washington
Daylight in Washington runs from about 7 h 11 min in December to 17 h 21 min in June, with the noon sun at roughly 12° and 59° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Typical costs for external pocket sliding doors around Washington
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 1 panel | £7,095–£8,595 |
| 3.6 m | 2 panels | £9,295–£11,395 |
| 4.0 m | 2 panels | £9,895–£12,095 |
See every size on the external pocket sliding doors page or try the guide price tool.
Timescales for external pocket sliding doors in Washington
A surveyor visits your Washington home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks from survey sign-off — and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door.
Do you need approval in Washington?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Specification choices for external pocket sliding doors in Washington
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
Questions about external pocket sliding doors in Washington
Is the price different in Washington?
No. Guide prices for external pocket sliding doors are the same across mainland Britain, including Washington. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.