- Postcode district
- B49
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Stratford-upon-Avon, Redditch, Evesham
- Building rules
- England
Why choose external pocket sliding doors in Alcester?
The right door depends on the opening, the room and the way you use the garden. Here is how external pocket sliding doors tend to work out in practice:
If the only wall beside your Alcester opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
Solid brick, cavity block or timber frame: the way your Alcester wall is built decides how the pocket is formed, which is why the survey looks at it closely.
- Insulating the pocket wall and sealing the panel edges limits heat loss through the cavity, helping the wall beside the door perform like the rest of the house.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
How much sun will a door in Alcester get?
At the latitude of Alcester, the midday sun climbs to about 61° in late June but only about 14° in late December, when daylight lasts around 7 h 42 min against 16 h 47 min in midsummer. A south-facing external pocket sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
External pocket sliding doors prices in Alcester
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 3.6 m | 2 panels | £9,295–£11,395 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Alcester
Surveys in the B49 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door.
Do you need approval in Alcester?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Choosing the specification
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
Questions about external pocket sliding doors in Alcester
Do I need building approval for external pocket sliding doors in Alcester?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.