- Postcode district
- SA11
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Briton Ferry, Clydach, Pontardawe
- Building rules
- Wales
Is an external pocket sliding door a good fit for your home in Neath?
A few practical points decide whether external pocket sliding doors suit a particular room and opening:
If the only wall beside your Neath opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
Solid brick, cavity block or timber frame: the way your Neath wall is built decides how the pocket is formed, which is why the survey looks at it closely.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
Sunlight, glass and orientation in Neath
Daylight in Neath runs from about 7 h 48 min in December to 16 h 40 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for external pocket sliding doors in Neath
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £9,295–£11,395 |
| 4.0 m | 2 panels | £9,895–£12,095 |
| 6.0 m | 3 panels | £12,895–£15,795 |
See every size on the external pocket sliding doors page or try the guide price tool.
What happens when you order external pocket sliding doors in Neath?
A surveyor visits your Neath home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks from survey sign-off — and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door.
Do you need approval in Neath?
In Wales, structural work to form or widen an opening needs Building Regulations approval and structural calculations, and the new door must meet the Welsh energy and safety glazing requirements. The Party Wall etc. Act 1996 may apply where steelwork bears on a party wall.
Specification choices for external pocket sliding doors in Neath
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
Questions about external pocket sliding doors in Neath
Is the price different in Neath?
No. Guide prices for external pocket sliding doors are the same across mainland Britain, including Neath. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.