Are secure sliding doors right for homes in East Sussex?
Here is what to weigh up if you are considering secure sliding doors for a home in East Sussex:
If your East Sussex home has a rear garden reached by a side gate or shared alley, the back door is the one to specify with PAS 24 testing and laminated glass.
Leaving an East Sussex house empty during the working day? A key-lockable handle stops anyone turning it from inside through broken glass.
- Internally glazed or secured beads mean the glass cannot be removed from the outside, closing off a route that some older doors left open.
- Specifying a tested door when you replace an old slider gives you a clear security standard to compare against, even though Approved Document Q only applies to new homes.
- An anti-snap key cylinder is designed to resist the snapping attack used on many older euro cylinders, protecting the lock itself.
Guide prices for secure sliding doors in East Sussex
Pricing is transparent and does not change because you are in East Sussex. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 2.4 m | 2 panels | £4,295–£5,295 |
| 3.0 m | 2 panels | £4,995–£6,095 |
| 3.6 m | 3 panels | £5,595–£6,895 |
Every size is on the secure sliding doors page.
Daylight and glass in East Sussex
The midday sun over East Sussex ranges from about 16° at the winter solstice to about 63° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Where we fit in East Sussex
We cover Brighton, Eastbourne, Hastings, Bexhill-on-Sea, Hailsham, Seaford and the rest of East Sussex.
Approvals in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Questions about secure sliding doors in East Sussex
Can you match other doors and windows in my East Sussex home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What is Secured by Design?
Secured by Design is a police-backed initiative that sets security standards for homes and products, and its requirements for doors build on PAS 24. Products and developments can gain recognition under the scheme. We are not a Secured by Design member company; if a project specifies it, tell us at the start so we can check what the specification requires.
What makes old sliding patio doors insecure?
Older sliding patio doors are often vulnerable because the sliding panel can be lifted off its track, the single-point lock can be forced, the glass beads are on the outside or the cylinder can be snapped. Modern secure sliding doors address each of those weaknesses with anti-lift devices, multipoint locks, internal glazing and anti-snap cylinders.
What is PAS 24?
PAS 24 is the UK enhanced security test standard for doorsets, including sliding doors. A door tested to it has been subjected to timed manual attacks with hand tools, mechanical loading of the panels and locks, and tests on how the glass is held. It applies to the complete doorset as tested, not to individual handles or locks on their own.