- Postcode district
- AB43
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Peterhead, Turriff, Ellon
- Building rules
- Scotland
Is a replacement sliding door a good fit for your home in Fraserburgh?
A few practical points decide whether replacement sliding doors suit a particular room and opening:
If the existing opening in your Fraserburgh home is sound and a sensible size, simply replacing the door gives the biggest improvement for the least disruption.
If your Fraserburgh home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
- Slimmer modern frames often give a larger area of glass within the same opening, letting more daylight into the room than the old door did.
- Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
Daylight in Fraserburgh and what it means for your glass
Daylight in Fraserburgh runs from about 6 h 32 min in December to 18 h 05 min in June, with the noon sun at roughly 9° and 56° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Sliding door replacement prices in Fraserburgh
Guide prices are the same across Aberdeenshire and Moray: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £4,295–£5,295 |
| 3.6 m | 3 panels | £5,595–£6,895 |
| 4.8 m | 4 panels | £6,995–£8,495 |
See every size on the replacement sliding doors page or try the guide price tool.
How fitting works in Fraserburgh
A surveyor visits your Fraserburgh home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off — and fitting usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors. We also cover Peterhead (25 km south-east) and Turriff (31 km south-west).
Rules for replacement sliding doors in Scotland
Scottish building standards still apply to a replacement door even where no warrant is needed, so the door must meet the energy and safety glazing requirements. If the opening is being formed or widened, a building warrant is required before work begins.
Specification choices for replacement sliding doors in Fraserburgh
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
Questions about replacement sliding doors in Fraserburgh
Can you match other doors and windows in my Fraserburgh home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What happens to my old patio door?
We remove your old patio door and take it away for disposal as part of the job, and that is included in our guide prices, so there is nothing for you to arrange. If you would rather keep the old door, for example for a shed or greenhouse project, tell us before the fitting day and we will leave it safely on site.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
Will the new door have a lower threshold?
A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.