Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Replacement sliding doors
Sliding door replacement · BR3

Sliding door replacement in Beckenham

Planning replacement sliding doors for a home in Beckenham? We measure, make and fit to your opening across Greater London, with Building Regulations compliance arranged and the certificate sent to you.

Postcode district
BR3
Survey
Free for new and replacement doors
Typical lead time
Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
Guide price
From £3,295 inc VAT
Nearby
Bromley, Sydenham, Forest Hill
Building rules
England

Sliding door replacement in Beckenham: what to know

Here is what to weigh up if you are considering replacement sliding doors for a home in Beckenham:

Does the old door in your Beckenham kitchen whistle in the wind or leave puddles on the sill? Worn seals and failed drainage are common reasons to replace rather than repair.

Considering a wider door for your Beckenham home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.

  • Slimmer modern frames often give a larger area of glass within the same opening, letting more daylight into the room than the old door did.
  • Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
  • Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.

Sunlight, glass and orientation in Beckenham

June 62°Dec 15°

Daylight in Beckenham runs from about 7 h 50 min in December to 16 h 37 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.

Guide prices for replacement sliding doors in Beckenham

Pricing is transparent and does not change because you are in Beckenham. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.

Guide prices for replacement sliding doors in Beckenham
Overall widthTypical panelsGuide price (fitted, inc VAT)
1.5 m2 panels£3,295–£4,095
2.4 m2 panels£4,295–£5,295
3.0 m2 panels£4,995–£6,095

See every size on the replacement sliding doors page or try the guide price tool.

Survey, manufacture and fitting around Beckenham

Surveys in the BR3 district are booked at a time that suits you. After you approve the quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors.

Rules for replacement sliding doors in England

English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.

Options to consider for your replacement sliding door

  • Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
  • New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
  • Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.

Questions about replacement sliding doors in Beckenham

Can you match other doors and windows in my Beckenham home?

Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.

How long does it take to replace a sliding patio door?

Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.

Will the new door have a lower threshold?

A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.

Is the survey free for a replacement door?

Yes, the survey for a replacement sliding door is free. We measure the opening, check its condition and the support above it, look at floor and outside levels, and talk through frame, glass and colour options. You then receive a written quote with the fixed price, and nothing is ordered until you confirm the surveyed specification in writing.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote