- Postcode district
- EN1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Southgate, Chingford, Tottenham
- Building rules
- England
Are replacement sliding doors right for your Enfield home?
Here is what to weigh up if you are considering replacement sliding doors for a home in Enfield:
Selling a house in Enfield in the next few years? Keep the competent person scheme certificate or Building Control notice for the new door with your property paperwork.
Before booking a survey for an Enfield flat, check your lease or title deeds and speak to the managing agent, factor or other owners, because doors in flats may need consent that houses do not.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
- Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.
- Slimmer modern frames often give a larger area of glass within the same opening, letting more daylight into the room than the old door did.
Daylight in Enfield and what it means for your glass
Because Enfield sees long summer days (about 16 h 40 min) and short winter ones (about 7 h 48 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Sliding door replacement prices in Enfield
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Enfield home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 2.1 m | 2 panels | £3,995–£4,895 |
| 2.4 m | 2 panels | £4,295–£5,295 |
See every size on the replacement sliding doors page or try the guide price tool.
How fitting works in Enfield
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Enfield?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for replacement sliding doors in Enfield
- Slimline upgrade. Narrow interlocks for the maximum glass area the existing opening allows.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
Questions about replacement sliding doors in Enfield
Do you fit replacement sliding doors in Enfield?
Yes. We survey and fit replacement sliding doors in Enfield and across Greater London, including nearby Southgate and Chingford. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Will the new door have a lower threshold?
A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
Is the survey free for a replacement door?
Yes, the survey for a replacement sliding door is free. We measure the opening, check its condition and the support above it, look at floor and outside levels, and talk through frame, glass and colour options. You then receive a written quote with the fixed price, and nothing is ordered until you confirm the surveyed specification in writing.