- Postcode district
- UB3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Southall, Hounslow, Uxbridge
- Building rules
- England
Sliding door replacement in Hayes: what to know
Before you settle on a door type, it helps to know what replacement sliding doors do well and what to check before you order.
Does the old door in your Hayes kitchen whistle in the wind or leave puddles on the sill? Worn seals and failed drainage are common reasons to replace rather than repair.
Considering a wider door for your Hayes home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
- Because the opening stays the same size, a straight replacement avoids structural work, steel beams and a Building Regulations structural application.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
Planning glass for the light in Hayes
In Hayes the shortest day has roughly 7 h 49 min of daylight and the longest about 16 h 38 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
How much do replacement sliding doors cost in Hayes?
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 4.0 m | 3 panels | £6,095–£7,395 |
| 4.8 m | 4 panels | £6,995–£8,495 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the replacement sliding doors page or try the guide price tool.
What happens when you order replacement sliding doors in Hayes?
Here is the usual sequence in Hayes: guide price, free survey, written quote, then manufacture (typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off). Fitting typically takes 1 day for a straight two-panel swap; 1–2 days for larger doors. Nearby, we also survey in Southall, Hounslow and Uxbridge.
Rules for replacement sliding doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Which options matter for replacement sliding doors?
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
Questions about replacement sliding doors in Hayes
Do I need building approval for replacement sliding doors in Hayes?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.
Is the survey free for a replacement door?
Yes, the survey for a replacement sliding door is free. We measure the opening, check its condition and the support above it, look at floor and outside levels, and talk through frame, glass and colour options. You then receive a written quote with the fixed price, and nothing is ordered until you confirm the surveyed specification in writing.