- Postcode district
- RM1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Hornchurch, Dagenham, Upminster
- Building rules
- England
Why choose replacement sliding doors in Romford?
These are the points a surveyor will go through with you when you choose replacement sliding doors for a home in Romford:
If your Romford home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
Considering a wider door for your Romford home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
- Because the opening stays the same size, a straight replacement avoids structural work, steel beams and a Building Regulations structural application.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
Planning glass for the light in Romford
At the latitude of Romford, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 49 min against 16 h 39 min in midsummer. A south-facing replacement sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for replacement sliding doors in Romford
Pricing is transparent and does not change because you are in Romford. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 2.1 m | 2 panels | £3,995–£4,895 |
| 4.8 m | 4 panels | £6,995–£8,495 |
See every size on the replacement sliding doors page or try the guide price tool.
What happens when you order replacement sliding doors in Romford?
We plan the job around your home in Romford: survey first, then a written quote, then manufacture (typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off). The fitting itself usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors. If you are in Hornchurch or Dagenham, the same process and prices apply.
Rules for replacement sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for replacement sliding doors
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- Upgraded glass. Triple, laminated, solar-control or obscure glass to suit the elevation.
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
Questions about replacement sliding doors in Romford
Do I need building approval for replacement sliding doors in Romford?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.
What happens to my old patio door?
We remove your old patio door and take it away for disposal as part of the job, and that is included in our guide prices, so there is nothing for you to arrange. If you would rather keep the old door, for example for a shed or greenhouse project, tell us before the fitting day and we will leave it safely on site.
Do I need building regulations approval to replace a patio door?
In England a replacement door is a controlled fitting, so it must meet the Building Regulations for energy and safety glazing. You do not apply in advance; instead the work is self-certified by a competent person scheme installer or notified to Building Control, which we arrange. In Scotland like-for-like replacement in a house usually needs no building warrant but must still meet the building standards.