Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Replacement sliding doors
Sliding door replacement · England

Sliding door replacement in Lincolnshire

Planning replacement sliding doors for a home in Lincolnshire? We measure, make and fit to your opening across Lincolnshire, with Building Regulations compliance arranged and the certificate sent to you.

Are replacement sliding doors right for homes in Lincolnshire?

These are the points a surveyor will go through with you when you choose replacement sliding doors for a home in Lincolnshire:

Before booking a survey for a Lincolnshire flat, check your lease or title deeds and speak to the managing agent, factor or other owners, because doors in flats may need consent that houses do not.

Considering a wider door for your Lincolnshire home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.

  • Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
  • New rollers and a precision track make a heavy door glide with a light push, where an old door may need both hands and a firm shove to open.
  • Because the opening stays the same size, a straight replacement avoids structural work, steel beams and a Building Regulations structural application.

Guide prices for replacement sliding doors in Lincolnshire

These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.

Guide prices for replacement sliding doors in Lincolnshire
Overall widthTypical panelsGuide price (fitted, inc VAT)
1.8 m2 panels£3,695–£4,495
2.1 m2 panels£3,995–£4,895
2.4 m2 panels£4,295–£5,295
4.8 m4 panels£6,995–£8,495

Every size is on the replacement sliding doors page.

Daylight and glass in Lincolnshire

June 60°Dec 13°

In Lincolnshire the shortest day has roughly 7 h 32 min of daylight and the longest about 16 h 58 min. The noon sun sits near 13° above the horizon in winter and 60° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.

Towns we cover in Lincolnshire

We survey and fit replacement sliding doors in 14 towns across Lincolnshire, including the DN16, DN21, DN32, DN35, LN11, LN5 postcode districts.

Approvals in England

In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.

Questions about replacement sliding doors in Lincolnshire

Can you match other doors and windows in my Lincolnshire home?

Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.

Will the new door have a lower threshold?

A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.

Do I need planning permission to replace a sliding door?

Replacing doors on a house is usually permitted development, so no planning application is needed, as long as the new doors are similar in appearance to the existing ones. Flats, listed buildings and properties covered by an Article 4 direction may need consent. Our planning guide explains more.

How long does it take to replace a sliding patio door?

Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote