- Postcode district
- NN16
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Desborough, Wellingborough, Corby
- Building rules
- England
Are replacement sliding doors right for your Kettering home?
A few practical points decide whether replacement sliding doors suit a particular room and opening:
Considering a wider door for your Kettering home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
If the existing opening in your Kettering home is sound and a sensible size, simply replacing the door gives the biggest improvement for the least disruption.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
- Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
Planning glass for the light in Kettering
At the latitude of Kettering, the midday sun climbs to about 61° in late June but only about 14° in late December, when daylight lasts around 7 h 40 min against 16 h 49 min in midsummer. A south-facing replacement sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
What should you budget for replacement sliding doors in Kettering?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Kettering home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £4,995–£6,095 |
| 3.6 m | 3 panels | £5,595–£6,895 |
| 4.0 m | 3 panels | £6,095–£7,395 |
See every size on the replacement sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Kettering
We plan the job around your home in Kettering: survey first, then a written quote, then manufacture (typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off). The fitting itself usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors. If you are in Desborough or Wellingborough, the same process and prices apply.
Rules for replacement sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Slimline upgrade. Narrow interlocks for the maximum glass area the existing opening allows.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
Questions about replacement sliding doors in Kettering
Do I need building approval for replacement sliding doors in Kettering?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Do I need planning permission to replace a sliding door?
Replacing doors on a house is usually permitted development, so no planning application is needed, as long as the new doors are similar in appearance to the existing ones. Flats, listed buildings and properties covered by an Article 4 direction may need consent. Our planning guide explains more.
Will the new door have a lower threshold?
A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.