- Postcode district
- TD5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Jedburgh, Duns, Galashiels
- Building rules
- Scotland
Sliding door replacement in Kelso: what to know
Most homeowners choosing replacement sliding doors want the same things: more light, a clear view and a door that is easy to live with.
If your Kelso home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
Does the old door in your Kelso kitchen whistle in the wind or leave puddles on the sill? Worn seals and failed drainage are common reasons to replace rather than repair.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
- Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
- New rollers and a precision track make a heavy door glide with a light push, where an old door may need both hands and a firm shove to open.
Planning glass for the light in Kelso
The midday sun over Kelso ranges from about 11° at the winter solstice to about 58° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Sliding door replacement prices in Kelso
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £4,995–£6,095 |
| 3.6 m | 3 panels | £5,595–£6,895 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the replacement sliding doors page or try the guide price tool.
How fitting works in Kelso
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Rules for replacement sliding doors in Scotland
Scottish building standards still apply to a replacement door even where no warrant is needed, so the door must meet the energy and safety glazing requirements. If the opening is being formed or widened, a building warrant is required before work begins.
Choosing the specification
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- Slimline upgrade. Narrow interlocks for the maximum glass area the existing opening allows.
Questions about replacement sliding doors in Kelso
Do I need building approval for replacement sliding doors in Kelso?
In Scotland a like-for-like replacement door usually needs no building warrant, but must meet the building standards; new openings need a warrant. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.