- Postcode district
- CV34
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Royal Leamington Spa, Kenilworth, Stratford-upon-Avon
- Building rules
- England
Sliding door replacement in Warwick: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how replacement sliding doors tend to work out in practice:
If your Warwick home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
Selling a house in Warwick in the next few years? Keep the competent person scheme certificate or Building Control notice for the new door with your property paperwork.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
- New rollers and a precision track make a heavy door glide with a light push, where an old door may need both hands and a firm shove to open.
- Slimmer modern frames often give a larger area of glass within the same opening, letting more daylight into the room than the old door did.
Sunlight, glass and orientation in Warwick
Sun angles matter for big glazed doors. Around Warwick, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for replacement sliding doors in Warwick?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Warwick home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 3.6 m | 3 panels | £5,595–£6,895 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the replacement sliding doors page or try the guide price tool.
Timescales for replacement sliding doors in Warwick
We plan the job around your home in Warwick: survey first, then a written quote, then manufacture (typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off). The fitting itself usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors. If you are in Royal Leamington Spa or Kenilworth, the same process and prices apply.
Do you need approval in Warwick?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Finishes and extras for replacement sliding doors
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
Questions about replacement sliding doors in Warwick
How soon can you survey in Warwick?
Surveys in the CV34 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off.
Will the new door have a lower threshold?
A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.