- Postcode district
- RH15
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Haywards Heath, Lewes, Brighton
- Building rules
- England
Sliding door replacement in Burgess Hill: what to know
Here is what to weigh up if you are considering replacement sliding doors for a home in Burgess Hill:
If your Burgess Hill home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
Does the old door in your Burgess Hill kitchen whistle in the wind or leave puddles on the sill? Worn seals and failed drainage are common reasons to replace rather than repair.
- Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.
- New rollers and a precision track make a heavy door glide with a light push, where an old door may need both hands and a firm shove to open.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
Planning glass for the light in Burgess Hill
In Burgess Hill the shortest day has roughly 7 h 55 min of daylight and the longest about 16 h 32 min. The noon sun sits near 16° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Typical costs for replacement sliding doors around Burgess Hill
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 3.0 m | 2 panels | £4,995–£6,095 |
| 4.0 m | 3 panels | £6,095–£7,395 |
See every size on the replacement sliding doors page or try the guide price tool.
From survey to fitted door in Burgess Hill
Surveys in the RH15 district are booked at a time that suits you. After you approve the quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors.
Do you need approval in Burgess Hill?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- Upgraded glass. Triple, laminated, solar-control or obscure glass to suit the elevation.
Questions about replacement sliding doors in Burgess Hill
How soon can you survey in Burgess Hill?
Surveys in the RH15 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off.
Do I need planning permission to replace a sliding door?
Replacing doors on a house is usually permitted development, so no planning application is needed, as long as the new doors are similar in appearance to the existing ones. Flats, listed buildings and properties covered by an Article 4 direction may need consent. Our planning guide explains more.
What happens to my old patio door?
We remove your old patio door and take it away for disposal as part of the job, and that is included in our guide prices, so there is nothing for you to arrange. If you would rather keep the old door, for example for a shed or greenhouse project, tell us before the fitting day and we will leave it safely on site.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.