- Postcode district
- B97
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Bromsgrove, Alcester, Shirley
- Building rules
- England
Is a replacement sliding door a good fit for your home in Redditch?
These are the points a surveyor will go through with you when you choose replacement sliding doors for a home in Redditch:
If the existing opening in your Redditch home is sound and a sensible size, simply replacing the door gives the biggest improvement for the least disruption.
Considering a wider door for your Redditch home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
- Because the opening stays the same size, a straight replacement avoids structural work, steel beams and a Building Regulations structural application.
- Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
Light and sun in Redditch
Sun angles matter for big glazed doors. Around Redditch, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Sliding door replacement prices in Redditch
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Redditch home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 1.8 m | 2 panels | £3,695–£4,495 |
| 3.0 m | 2 panels | £4,995–£6,095 |
See every size on the replacement sliding doors page or try the guide price tool.
Timescales for replacement sliding doors in Redditch
We plan the job around your home in Redditch: survey first, then a written quote, then manufacture (typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off). The fitting itself usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors. If you are in Bromsgrove or Alcester, the same process and prices apply.
Rules for replacement sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for replacement sliding doors?
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- Upgraded glass. Triple, laminated, solar-control or obscure glass to suit the elevation.
Questions about replacement sliding doors in Redditch
How soon can you survey in Redditch?
Surveys in the B97 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off.
Is the survey free for a replacement door?
Yes, the survey for a replacement sliding door is free. We measure the opening, check its condition and the support above it, look at floor and outside levels, and talk through frame, glass and colour options. You then receive a written quote with the fixed price, and nothing is ordered until you confirm the surveyed specification in writing.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.