- Postcode district
- BS8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Bristol, Bedminster, Bishopston
- Building rules
- England
What sliding doors for extensions offer homes in Clifton
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
Self-building in Clifton or elsewhere in Bristol? Ask for the sliding doors to be quoted as part of a wider glazing package so the frames, colours and glass match across the house.
Where an extension in Clifton faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
Planning glass for the light in Clifton
Sun angles matter for big glazed doors. Around Clifton, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Typical costs for sliding doors for extensions around Clifton
Guide prices are the same across Bristol. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.1 m | 2 panels | £5,495–£6,795 |
| 2.4 m | 2 panels | £5,995–£7,295 |
See every size on the sliding doors for extensions page or try the guide price tool.
How fitting works in Clifton
Surveys in the BS8 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, scheduled to the build programme.
Do you need approval in Clifton?
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Finishes and extras for sliding doors for extensions
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
Questions about sliding doors for extensions in Clifton
How soon can you survey in Clifton?
Surveys in the BS8 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
When should I order sliding doors for an extension?
Order sliding doors for an extension as soon as the opening is built and a check survey can be done, and agree the target fitting date with your builder in advance. Slimline doors typically take 6–8 weeks to make after sign-off. Getting a quote from drawings early means the specification is settled and only the final measurements are needed.