- Postcode district
- BT54
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Ballymoney, Portrush, Coleraine
- Building rules
- Northern Ireland
Sliding doors for extensions and garden rooms in Ballycastle: what to know
Most homeowners choosing sliding doors for extensions want the same things: more light, a clear view and a door that is easy to live with.
Planning an extension in Ballycastle? Send us the drawings before the steel is ordered, so the beam above the doors can be designed with the door in mind.
For a garden room at the bottom of a Ballycastle garden, think about access: large glass panels need a clear route from the road to the site.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
Light and sun in Ballycastle
The midday sun over Ballycastle ranges from about 11° at the winter solstice to about 58° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
How much do sliding doors for extensions cost in Ballycastle?
Guide prices are the same across County Antrim. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.6 m | 2 panels | £7,795–£9,495 |
| 4.0 m | 3 panels | £8,395–£10,195 |
See every size on the sliding doors for extensions page or try the guide price tool.
How fitting works in Ballycastle
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Ballymoney or Portrush, the same process and prices apply. Ballycastle is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Do you need approval in Ballycastle?
Extensions in Northern Ireland are approved by district council building control under the Building Regulations (Northern Ireland), including their doors. We take on work in Northern Ireland by arrangement.
Choosing the specification
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Ballycastle
Do you fit sliding doors for extensions in Ballycastle?
Yes, by arrangement. Ballycastle is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.