- Postcode district
- TN33
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Bexhill-on-Sea, Hastings, Heathfield
- Building rules
- England
What sliding doors for extensions offer homes in Battle
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
If your Battle builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
When your Battle extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
How much sun will a door in Battle get?
Sun angles matter for big glazed doors. Around Battle, midday sun reaches about 63° in summer and drops to about 16° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for sliding doors for extensions in Battle?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Battle home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £6,895–£8,395 |
| 3.6 m | 2 panels | £7,795–£9,495 |
| 4.8 m | 3 panels | £9,595–£11,695 |
See every size on the sliding doors for extensions page or try the guide price tool.
Timescales for sliding doors for extensions in Battle
A surveyor visits your Battle home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks for slimline systems after check survey sign-off — and fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in England
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Which options matter for sliding doors for extensions?
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Battle
How soon can you survey in Battle?
Surveys in the TN33 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.