- Postcode district
- EH54
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Broxburn, Bathgate, Linlithgow
- Building rules
- Scotland
Are sliding doors for extensions right for your Livingston home?
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
Where an extension in Livingston faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
Planning an extension in Livingston? Send us the drawings before the steel is ordered, so the beam above the doors can be designed with the door in mind.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
Planning glass for the light in Livingston
Sun angles matter for big glazed doors. Around Livingston, midday sun reaches about 58° in summer and drops to about 11° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do sliding doors for extensions cost in Livingston?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Livingston home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
Survey, manufacture and fitting around Livingston
A surveyor visits your Livingston home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks for slimline systems after check survey sign-off — and fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in Scotland
A Scottish extension is warrant work: the council approves the design, including its doors and glazing, against the Scottish building standards before building starts.
Finishes and extras for sliding doors for extensions
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
Questions about sliding doors for extensions in Livingston
Do you fit sliding doors for extensions in Livingston?
Yes. We survey and fit sliding doors for extensions in Livingston and across Edinburgh and the Lothians, including nearby Broxburn and Bathgate. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.