- Postcode district
- CM9
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Witham, Chelmsford, Burnham-on-Crouch
- Building rules
- England
Sliding doors for extensions and garden rooms in Maldon: what to know
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
If your Maldon builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
When your Maldon extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
Light and sun in Maldon
At the latitude of Maldon, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 47 min against 16 h 41 min in midsummer. A south-facing sliding door for an extension lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Sliding doors for extensions and garden rooms prices in Maldon
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Maldon home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £5,995–£7,295 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 3.6 m | 2 panels | £7,795–£9,495 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Maldon?
A surveyor visits your Maldon home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks for slimline systems after check survey sign-off — and fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Options to consider for your sliding door for an extension
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
Questions about sliding doors for extensions in Maldon
Do I need building approval for sliding doors for extensions in Maldon?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.