- Postcode district
- N1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Highbury, Camden, Kentish Town
- Building rules
- England
What sliding doors for extensions offer homes in Islington
Most homeowners choosing sliding doors for extensions want the same things: more light, a clear view and a door that is easy to live with.
When your Islington extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
Where an extension in Islington faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
Planning glass for the light in Islington
Daylight in Islington runs from about 7 h 49 min in December to 16 h 39 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Sliding doors for extensions and garden rooms prices in Islington
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Islington?
Here is the usual sequence in Islington: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks for slimline systems after check survey sign-off). Fitting typically takes 1–2 days, scheduled to the build programme. Nearby, we also survey in Highbury, Camden and Kentish Town.
Rules for sliding doors for extensions in England
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Finishes and extras for sliding doors for extensions
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
Questions about sliding doors for extensions in Islington
Do you fit sliding doors for extensions in Islington?
Yes. We survey and fit sliding doors for extensions in Islington and across Greater London, including nearby Highbury and Camden. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.