- Postcode district
- M44
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Urmston, Sale, Stretford
- Building rules
- England
Why choose sliding doors for extensions in Irlam?
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
For a garden room at the bottom of an Irlam garden, think about access: large glass panels need a clear route from the road to the site.
Where an extension in Irlam faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
Planning glass for the light in Irlam
At the latitude of Irlam, the midday sun climbs to about 60° in late June but only about 13° in late December, when daylight lasts around 7 h 29 min against 17 h 01 min in midsummer. A south-facing sliding door for an extension lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Sliding doors for extensions and garden rooms prices in Irlam
Guide prices are the same across Greater Manchester. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 3.6 m | 2 panels | £7,795–£9,495 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Irlam?
Here is the usual sequence in Irlam: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks for slimline systems after check survey sign-off). Fitting typically takes 1–2 days, scheduled to the build programme. Nearby, we also survey in Urmston, Sale and Stretford.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Choosing the specification
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
Questions about sliding doors for extensions in Irlam
Can you match other doors and windows in my Irlam home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.