- Postcode district
- NP22
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Ebbw Vale, Merthyr Tydfil, Bargoed
- Building rules
- Wales
Why choose sliding doors for extensions in Tredegar?
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
If your Tredegar builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
For a garden room at the bottom of a Tredegar garden, think about access: large glass panels need a clear route from the road to the site.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- Agreeing a fitting date with your builder lets the extension be made weathertight on programme, so plastering and flooring can follow without waiting on the doors.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
Planning glass for the light in Tredegar
Sun angles matter for big glazed doors. Around Tredegar, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do sliding doors for extensions cost in Tredegar?
Guide prices are the same across Gwent. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 3.0 m | 2 panels | £6,895–£8,395 |
See every size on the sliding doors for extensions page or try the guide price tool.
From survey to fitted door in Tredegar
Surveys in the NP22 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, scheduled to the build programme.
Do you need approval in Tredegar?
In Wales, sliding doors in an extension are approved as part of the extension's Building Regulations application, and the glazing must meet the Welsh energy and safety glazing requirements, including the limits on how much of an extension can be glazed.
Choosing the specification
- Three or four panels. More panels for wider extension openings, with one or more sliding.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
Questions about sliding doors for extensions in Tredegar
Do you fit sliding doors for extensions in Tredegar?
Yes. We survey and fit sliding doors for extensions in Tredegar and across Gwent, including nearby Ebbw Vale and Merthyr Tydfil. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.