- Postcode district
- PO12
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Portsmouth, Fareham, Waterlooville
- Building rules
- England
Is a sliding door for an extension a good fit for your home in Gosport?
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
Where an extension in Gosport faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
If your Gosport builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
Sunlight, glass and orientation in Gosport
Because Gosport sees long summer days (about 16 h 31 min) and short winter ones (about 7 h 57 min), the elevation your door faces makes a real difference. With the midday sun at about 16° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do sliding doors for extensions cost in Gosport?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Gosport home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 3.0 m | 2 panels | £6,895–£8,395 |
See every size on the sliding doors for extensions page or try the guide price tool.
How fitting works in Gosport
Surveys in the PO12 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in England
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Choosing the specification
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
Questions about sliding doors for extensions in Gosport
Is the price different in Gosport?
No. Guide prices for sliding doors for extensions are the same across mainland Britain, including Gosport. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.