- Postcode district
- EN11
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Ware, Hertford, Cheshunt
- Building rules
- England
What sliding doors for extensions offer homes in Hoddesdon
Most homeowners choosing sliding doors for extensions want the same things: more light, a clear view and a door that is easy to live with.
Where an extension in Hoddesdon faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
Planning an extension in Hoddesdon? Send us the drawings before the steel is ordered, so the beam above the doors can be designed with the door in mind.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
How much sun will a door in Hoddesdon get?
In Hoddesdon the shortest day has roughly 7 h 47 min of daylight and the longest about 16 h 41 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Guide prices for sliding doors for extensions in Hoddesdon
Guide prices are the same across Hertfordshire. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.1 m | 2 panels | £5,495–£6,795 |
| 4.0 m | 3 panels | £8,395–£10,195 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Hoddesdon?
A surveyor visits your Hoddesdon home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks for slimline systems after check survey sign-off — and fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Choosing the specification
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
Questions about sliding doors for extensions in Hoddesdon
How soon can you survey in Hoddesdon?
Surveys in the EN11 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.