- Postcode district
- KW14
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Wick
- Building rules
- Scotland
Sliding doors for extensions and garden rooms in Thurso: what to know
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
If your Thurso builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
When your Thurso extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
- Agreeing a fitting date with your builder lets the extension be made weathertight on programme, so plastering and flooring can follow without waiting on the doors.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
Light and sun in Thurso
Because Thurso sees long summer days (about 18 h 22 min) and short winter ones (about 6 h 17 min), the elevation your door faces makes a real difference. With the midday sun at about 8° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
What should you budget for sliding doors for extensions in Thurso?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Thurso home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £6,895–£8,395 |
| 3.6 m | 2 panels | £7,795–£9,495 |
| 4.0 m | 3 panels | £8,395–£10,195 |
See every size on the sliding doors for extensions page or try the guide price tool.
From survey to fitted door in Thurso
A surveyor visits your Thurso home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks for slimline systems after check survey sign-off — and fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in Scotland
A Scottish extension is warrant work: the council approves the design, including its doors and glazing, against the Scottish building standards before building starts.
Choosing the specification
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
Questions about sliding doors for extensions in Thurso
Can you match other doors and windows in my Thurso home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.