- Postcode district
- NG31
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Sleaford, Newark-on-Trent, Bingham
- Building rules
- England
Are sliding doors for extensions right for your Grantham home?
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
For a garden room at the bottom of a Grantham garden, think about access: large glass panels need a clear route from the road to the site.
Where an extension in Grantham faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
How much sun will a door in Grantham get?
Sun angles matter for big glazed doors. Around Grantham, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for sliding doors for extensions in Grantham
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
Survey, manufacture and fitting around Grantham
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Sleaford or Newark-on-Trent, the same process and prices apply.
Rules for sliding doors for extensions in England
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Finishes and extras for sliding doors for extensions
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
Questions about sliding doors for extensions in Grantham
Do you fit sliding doors for extensions in Grantham?
Yes. We survey and fit sliding doors for extensions in Grantham and across Lincolnshire, including nearby Sleaford and Newark-on-Trent. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.