- Postcode district
- OX14
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Didcot, Oxford, Wantage
- Building rules
- England
Why choose sliding doors for extensions in Abingdon?
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
Where an extension in Abingdon faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
If your Abingdon builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
Daylight in Abingdon and what it means for your glass
At the latitude of Abingdon, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 48 min against 16 h 40 min in midsummer. A south-facing sliding door for an extension lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for sliding doors for extensions in Abingdon
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Abingdon home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
Timescales for sliding doors for extensions in Abingdon
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Didcot or Oxford, the same process and prices apply.
Rules for sliding doors for extensions in England
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Which options matter for sliding doors for extensions?
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
Questions about sliding doors for extensions in Abingdon
Do you fit sliding doors for extensions in Abingdon?
Yes. We survey and fit sliding doors for extensions in Abingdon and across Oxfordshire, including nearby Didcot and Oxford. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.
When should I order sliding doors for an extension?
Order sliding doors for an extension as soon as the opening is built and a check survey can be done, and agree the target fitting date with your builder in advance. Slimline doors typically take 6–8 weeks to make after sign-off. Getting a quote from drawings early means the specification is settled and only the final measurements are needed.