- Postcode district
- TD9
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Selkirk, Jedburgh, Galashiels
- Building rules
- Scotland
Sliding doors for extensions and garden rooms in Hawick: what to know
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
For a garden room at the bottom of a Hawick garden, think about access: large glass panels need a clear route from the road to the site.
Where an extension in Hawick faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
Daylight in Hawick and what it means for your glass
Sun angles matter for big glazed doors. Around Hawick, midday sun reaches about 58° in summer and drops to about 11° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Sliding doors for extensions and garden rooms prices in Hawick
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £6,895–£8,395 |
| 3.6 m | 2 panels | £7,795–£9,495 |
| 4.8 m | 3 panels | £9,595–£11,695 |
See every size on the sliding doors for extensions page or try the guide price tool.
From survey to fitted door in Hawick
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Selkirk or Jedburgh, the same process and prices apply.
Rules for sliding doors for extensions in Scotland
A Scottish extension is warrant work: the council approves the design, including its doors and glazing, against the Scottish building standards before building starts.
Options to consider for your sliding door for an extension
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
Questions about sliding doors for extensions in Hawick
How soon can you survey in Hawick?
Surveys in the TD9 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.
When should I order sliding doors for an extension?
Order sliding doors for an extension as soon as the opening is built and a check survey can be done, and agree the target fitting date with your builder in advance. Slimline doors typically take 6–8 weeks to make after sign-off. Getting a quote from drawings early means the specification is settled and only the final measurements are needed.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.