- Postcode district
- CF64
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Dinas Powys, Cardiff, Barry
- Building rules
- Wales
Sliding doors for extensions and garden rooms in Penarth: what to know
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
For a garden room at the bottom of a Penarth garden, think about access: large glass panels need a clear route from the road to the site.
Where an extension in Penarth faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
Light and sun in Penarth
In Penarth the shortest day has roughly 7 h 50 min of daylight and the longest about 16 h 38 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
What should you budget for sliding doors for extensions in Penarth?
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 3.6 m | 2 panels | £7,795–£9,495 |
See every size on the sliding doors for extensions page or try the guide price tool.
How fitting works in Penarth
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Dinas Powys or Cardiff, the same process and prices apply.
Rules for sliding doors for extensions in Wales
In Wales, sliding doors in an extension are approved as part of the extension's Building Regulations application, and the glazing must meet the Welsh energy and safety glazing requirements, including the limits on how much of an extension can be glazed.
Specification choices for sliding doors for extensions in Penarth
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Penarth
Do you fit sliding doors for extensions in Penarth?
Yes. We survey and fit sliding doors for extensions in Penarth and across South Glamorgan, including nearby Dinas Powys and Cardiff. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
When should I order sliding doors for an extension?
Order sliding doors for an extension as soon as the opening is built and a check survey can be done, and agree the target fitting date with your builder in advance. Slimline doors typically take 6–8 weeks to make after sign-off. Getting a quote from drawings early means the specification is settled and only the final measurements are needed.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.