- Postcode district
- SA8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Clydach, Neath, Ystradgynlais
- Building rules
- Wales
Are sliding doors for extensions right for your Pontardawe home?
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
When your Pontardawe extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
Planning an extension in Pontardawe? Send us the drawings before the steel is ordered, so the beam above the doors can be designed with the door in mind.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
Planning glass for the light in Pontardawe
Daylight in Pontardawe runs from about 7 h 47 min in December to 16 h 41 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Sliding doors for extensions and garden rooms prices in Pontardawe
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £5,995–£7,295 |
| 4.0 m | 3 panels | £8,395–£10,195 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Pontardawe?
A surveyor visits your Pontardawe home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks for slimline systems after check survey sign-off — and fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in Wales
In Wales, sliding doors in an extension are approved as part of the extension's Building Regulations application, and the glazing must meet the Welsh energy and safety glazing requirements, including the limits on how much of an extension can be glazed.
Choosing the specification
- Three or four panels. More panels for wider extension openings, with one or more sliding.
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
Questions about sliding doors for extensions in Pontardawe
How soon can you survey in Pontardawe?
Surveys in the SA8 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
When should I order sliding doors for an extension?
Order sliding doors for an extension as soon as the opening is built and a check survey can be done, and agree the target fitting date with your builder in advance. Slimline doors typically take 6–8 weeks to make after sign-off. Getting a quote from drawings early means the specification is settled and only the final measurements are needed.
How much do sliding doors for an extension cost?
Slimline sliding doors for an extension have a guide price of £7,795–£9,495 for a 3.6 m opening and £9,595–£11,695 for a 4.8 m opening, fitted, inc VAT at standard 2.1 m height. Taller doors, extra panels, special glass and flush thresholds move the price. Your written quote after the check survey fixes it.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.