- Postcode district
- B70
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Oldbury, Smethwick, Wednesbury
- Building rules
- England
Sliding doors for extensions and garden rooms in West Bromwich: what to know
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
Where an extension in West Bromwich faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
Planning an extension in West Bromwich? Send us the drawings before the steel is ordered, so the beam above the doors can be designed with the door in mind.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
Planning glass for the light in West Bromwich
Because West Bromwich sees long summer days (about 16 h 50 min) and short winter ones (about 7 h 39 min), the elevation your door faces makes a real difference. With the midday sun at about 14° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Typical costs for sliding doors for extensions around West Bromwich
Guide prices are the same across the West Midlands. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 3.0 m | 2 panels | £6,895–£8,395 |
| 4.0 m | 3 panels | £8,395–£10,195 |
See every size on the sliding doors for extensions page or try the guide price tool.
Survey, manufacture and fitting around West Bromwich
A surveyor visits your West Bromwich home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks for slimline systems after check survey sign-off — and fitting usually takes 1–2 days, scheduled to the build programme.
Do you need approval in West Bromwich?
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Choosing the specification
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Corner opening. Sliding panels meeting at a corner with no post, for extensions open on two sides.
Questions about sliding doors for extensions in West Bromwich
Do I need building approval for sliding doors for extensions in West Bromwich?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
What structural opening size should my builder leave for sliding doors?
Your builder should leave the structural opening size we give in writing for your chosen door, which is the frame size plus a small fitting tolerance on each side and at the head. The exact figure depends on the system and the threshold detail. We confirm it from your drawings early, then check the built opening before the door is made.