- Postcode district
- PO21
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Chichester, Littlehampton, Arundel
- Building rules
- England
Are sliding doors for extensions right for your Bognor Regis home?
A few practical points decide whether sliding doors for extensions suit a particular room and opening:
If your Bognor Regis builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
Self-building in Bognor Regis or elsewhere in West Sussex? Ask for the sliding doors to be quoted as part of a wider glazing package so the frames, colours and glass match across the house.
- Telling the engineer the door type and span early lets them design the beam above it to limit deflection, protecting the smooth running of large sliding panels.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
How much sun will a door in Bognor Regis get?
In Bognor Regis the shortest day has roughly 7 h 57 min of daylight and the longest about 16 h 30 min. The noon sun sits near 16° above the horizon in winter and 63° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
How much do sliding doors for extensions cost in Bognor Regis?
Guide prices are the same across West Sussex. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 4.0 m | 3 panels | £8,395–£10,195 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Bognor Regis?
Here is the usual sequence in Bognor Regis: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks for slimline systems after check survey sign-off). Fitting typically takes 1–2 days, scheduled to the build programme. Nearby, we also survey in Chichester, Littlehampton and Arundel.
Rules for sliding doors for extensions in England
Doors in an English extension go through the extension's Building Regulations approval. Under Approved Document L, the total area of windows, roof windows and doors is normally capped at 25% of the extension's floor area plus any openings the extension removes, unless your designer shows compensating improvements; the glass must be safety glazing under Approved Document K.
Finishes and extras for sliding doors for extensions
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
Questions about sliding doors for extensions in Bognor Regis
Can you match other doors and windows in my Bognor Regis home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.