- Postcode district
- SN8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Swindon, Calne, Devizes
- Building rules
- England
Sliding doors for extensions and garden rooms in Marlborough: what to know
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
If your Marlborough builder is about to pour the screed, confirm the finished floor level for the threshold first, because it is very hard to change afterwards.
Where an extension in Marlborough faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
Light and sun in Marlborough
The midday sun over Marlborough ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
How much do sliding doors for extensions cost in Marlborough?
Guide prices are the same across Wiltshire. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £6,895–£8,395 |
| 4.8 m | 3 panels | £9,595–£11,695 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
From survey to fitted door in Marlborough
Here is the usual sequence in Marlborough: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks for slimline systems after check survey sign-off). Fitting typically takes 1–2 days, scheduled to the build programme. Nearby, we also survey in Swindon, Calne and Devizes.
Do you need approval in Marlborough?
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Choosing the specification
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
Questions about sliding doors for extensions in Marlborough
Is the price different in Marlborough?
No. Guide prices for sliding doors for extensions are the same across mainland Britain, including Marlborough. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
What sliding doors suit a garden room?
A garden room usually suits a two-panel or three-panel sliding door sized to the front of the building, with a header strong enough to carry the roof without pressing on the frame. Aluminium systems are a common choice because they are stable and need little maintenance. Glass with good insulation helps if the room will be used all year.