- Postcode district
- BT46
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Magherafelt, Dungiven, Cookstown
- Building rules
- Northern Ireland
Are slimline sliding doors right for your Maghera home?
A few practical points decide whether slimline sliding doors suit a particular room and opening:
Where the plans for a Maghera project show a wide glazed rear wall, the structural engineer should know the panel weights early so the steel can be sized for them.
A Maghera garden with a view worth framing suits a slim interlock, because the meeting line between panels stays narrow enough to look straight past.
- Multi-point locking is concealed within the slim interlock and frame, keeping hardware out of sight while still engaging several points when the door closes.
- Panels of up to around 2.5–3 m wide mean a wide opening needs fewer sections, and so fewer interlocks crossing the view.
- Outer frames can be recessed into the floor, reveals and head, hiding almost all of the aluminium so that only glass and the narrow interlock remain visible.
Daylight in Maghera and what it means for your glass
Daylight in Maghera runs from about 7 h 12 min in December to 17 h 20 min in June, with the noon sun at roughly 12° and 59° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do slimline sliding doors cost in Maghera?
Guide prices are the same across County Londonderry: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 4.0 m | 3 panels | £8,395–£10,195 |
See every size on the slimline sliding doors page or try the guide price tool.
From survey to fitted door in Maghera
We plan the job around your home in Maghera: survey first, then a written quote, then manufacture (typically 6–8 weeks from survey sign-off). The fitting itself usually takes 1–2 days; allow 3–5 days of building work first if the opening is formed or widened. If you are in Magherafelt or Dungiven, the same process and prices apply. Maghera is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Rules for slimline sliding doors in Northern Ireland
In Northern Ireland, the Building Regulations (Northern Ireland) apply through your district council's building control service, with energy guidance in Technical Booklet F1. Work in Northern Ireland is by arrangement, and we confirm the approval route for your property at survey.
Which options matter for slimline sliding doors?
- Glass. Double or triple glazed safety glass, with solar-control, low-iron or laminated units available.
- Concealed frame. Recess the outer frame into the floor, reveals and ceiling so almost no aluminium shows from inside.
- Colours. Black, anthracite grey, bronze-effect or a special RAL powder coat, with dual colour available.
Questions about slimline sliding doors in Maghera
How soon can you survey in Maghera?
Survey dates in the BT46 district are arranged individually when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
How do you clean a slimline sliding door?
Clean a slimline sliding door by vacuuming the stainless track, wiping it with a damp cloth and washing the glass and frames with mild soapy water. A flush threshold's outside drainage channel needs clearing of leaves and grit, because it is what keeps water away from the floor. Large panes are easier with a long-handled squeegee. Manufacturer guarantees are passed to you, with our workmanship guarantee set out in writing in your quote.
How slim is a slimline sliding door?
A slimline sliding door typically has a central interlock of around 20–25 mm, the narrow vertical section where the two panels meet. Standard aluminium sliders are considerably wider at this point. With the outer frame recessed into the floor, walls and ceiling, the interlock can be almost the only visible aluminium. Exact figures vary by system and are confirmed in your quote.
Are slimline sliding doors less secure because the frames are thin?
Slimline sliding doors are not less secure simply because the frames are thin; security depends on the locking, the glass and how the panels are held in the track. Well-specified systems use multi-point locks concealed in the interlock, anti-lift features and laminated glass. Slimline systems are available tested to PAS 24, and laminated inner panes can be specified where security is a priority.