- Postcode district
- BS3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Bristol, Clifton, Bishopston
- Building rules
- England
Are tilt and slide doors right for your Bedminster home?
Before you settle on a door type, it helps to know what tilt and slide doors do well and what to check before you order.
Is the opening in your Bedminster home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
Where an old patio door in Bedminster rattles or lets in draughts, a sash that seals on all four edges is a practical fix that keeps the same opening.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
How much sun will a door in Bedminster get?
The midday sun over Bedminster ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
How much do tilt and slide doors cost in Bedminster?
Guide prices are the same across Bristol: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
What happens when you order tilt and slide doors in Bedminster?
Here is the usual sequence in Bedminster: guide price, free survey, written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Bristol, Clifton and Bishopston.
Do you need approval in Bedminster?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your tilt and slide door
- Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
- Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
Questions about tilt and slide doors in Bedminster
Do you fit tilt and slide doors in Bedminster?
Yes. We survey and fit tilt and slide doors in Bedminster and across Bristol, including nearby Bristol and Clifton. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Do I need Building Regulations approval for a tilt and slide door?
A tilt and slide door replacing an existing door in England is a controlled fitting, so it must be fitted by an installer registered with a competent person scheme or notified to Building Control, and the glass must be safety glazing to BS EN 12600. Planning permission is not usually needed on a house when the door looks similar. Flats and listed buildings may need consent, and Wales, Scotland and Northern Ireland have their own rules.
Are tilt and slide doors draught-proof?
Tilt and slide doors are among the most draught-resistant sliding designs because the closed sash compresses gaskets on all four edges. Thermal performance depends on frame material and glass. In England, a replacement door in an existing home with more than 60% glazing must reach a U-value of 1.4 W/m²K or better, so the glass is specified to meet it. Wales, Scotland and Northern Ireland have their own requirements.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.